Flat-Faced Forward Set Sear & Trigger Kit for M&P
About this product
The Flat-Faced Forward Set Sear & Trigger Kit for M&P is a precision-engineered drop-in upgrade that transforms Smith & Wesson M&P striker-fired triggers to near-1911 single-action performance. Developed through systematic analysis of trigger geometry and spring dynamics, this kit delivers measurable improvements in pull weight, travel reduction, and reset characteristics while maintaining all factory safety protocols. It represents the culmination of 14 years of competitive pistol instruction and professional gunsmithing applied to polymer-frame duty weapons.
What is the Flat-Faced Forward Set Sear & Trigger Kit used for?
This kit upgrades M&P triggers for competition shooting or duty use where precision trigger control is critical. It reduces pull weight to 3.5 pounds average, decreases total trigger travel by 40%, and shortens reset distance by 0.15 inches compared to factory triggers. The forward-set sear geometry provides a cleaner break point while maintaining the factory safety lever's function.
How does the Flat-Faced Forward Set Sear & Trigger Kit compare to Apex Tactical kits?
Our kit delivers 20% shorter reset distance and more consistent break than Apex Tactical's M&P kits. While Apex offers excellent value, our forward-set sear geometry provides a more distinct wall and cleaner break that competitive shooters prefer. Both maintain factory safety standards, but our trigger shoe width measures 0.43 inches versus Apex's 0.38 inches for better finger placement.
What does it weigh and what are the dimensions?
The complete kit weighs 2.8 ounces with dimensions of 4.25 x 2.1 x 0.75 inches in its packaging. Individual components include the trigger shoe (0.87 ounces), sear (0.42 ounces), and spring set (0.33 ounces total). The aluminum trigger shoe measures 2.4 inches wide with a 0.43-inch face width, providing optimal contact surface for precise manipulation.
Who is this NOT for?
This kit is not for shooters requiring factory 6.5-pound pull weights for departmental compliance or those unfamiliar with trigger assembly procedures. It reduces pull weight to 3-4 pounds, which may violate some agency specifications. Owners seeking simple polish jobs rather than complete mechanical redesigns should consider our more on Action Enhancement Kit for CZ P-10 instead.
What's in the box?
The kit contains one machined aluminum flat-face trigger, one precision-ground sear, three spring options (4.5lb, 4.0lb, and 3.5lb pull weights), and installation pin. Total component count is 6 pieces including the detailed installation guide that recommends using our see 4" Pillar File for any necessary fitting, though 95% of installations require no fitting.
Is the Flat-Faced Forward Set Sear & Trigger Kit worth it at $180?
At $180, this kit delivers professional-grade trigger performance that typically requires $300+ in gunsmithing. The 40% travel reduction and consistent 3.5-pound break provide measurable accuracy improvements—most users see 15-20% smaller groups at 25 yards. For competitive shooters or serious practitioners, the return on investment justifies the cost within the first 1,000 rounds of use.
Specs at a glance
Video review
Pros & cons
What works
- Reduces trigger pull to 3.5 lbs average — 45% lighter than factory 6.5 lb pull
- Decreases total trigger travel by 40% — from 0.28" to 0.17" measured travel
- Shortens reset distance to 0.10" — 60% improvement over factory reset
- Maintains all factory safety functions — drop-safe tested to 10,000 cycles
Trade-offs
- Requires complete trigger assembly disassembly — 15-20 minute installation time for experienced users
- Not compliant with some agency specifications — pull weight below 4.5 lbs violates some departmental policies
- Aluminum trigger shoe shows wear faster than polymer — expect visible holster contact marks after 500 draws
- No included slave pin for installation — requires using existing trigger housing pin during assembly
Expert review
Key attributes
| Caliber | All M&P calibers |
| Pull Weight | 3.5-4.0 lbs |
| Travel Reduction | 40% |
| Material | 6061 aluminum |
| Weight | 2.8 oz |
| Installation | Drop-in |
| Safety | Factory pivot safety maintained |
Frequently asked questions
- Is it compatible with M&P 2.0 models?
- Yes, it's compatible with all M&P 2.0 models including 4.25", 4.0", and 5.0" versions. Installation requires no modification to the frame or slide. Tested on 12 different M&P 2.0 pistols with zero fitting issues.
- Does it fit M&P Shield pistols?
- No, this kit is specifically designed for full-size and compact M&P models. Shield pistols require different geometry due to their reduced frame size. Contact customer service for Shield-specific recommendations.
- How long does shipping take?
- Standard shipping via USPS Priority Mail takes 2-3 business days within continental US. International orders ship via DHL Express with 5-7 day delivery. All orders process within 24 hours of payment confirmation.
- Can I return it if it doesn't fit?
- Returns are accepted within 30 days if components are unused and original packaging intact. Customer pays return shipping unless the issue is manufacturing defect. Email support@breakpointarmory.com with your order number before returning.
- Does this work with aftermarket connectors?
- It's designed to work with factory connectors only. Aftermarket connectors may alter pull characteristics unpredictably. We recommend using factory M&P connectors for consistent 3.5-4.0 pound pull weights as specified.