Flat-Faced Forward Set Trigger Kit for Polymer Frame M&P M2.0
Video review
Expert review
About this product
The Flat-Faced Forward Set Trigger Kit for Polymer Frame M&P M2.0 is a precision-engineered trigger system designed to optimize the factory M&P M2.0's performance envelope while maintaining drop-in compatibility. This kit represents my 14 years of competitive shooting instruction distilled into a single component upgrade. Every specification was validated against 8 years of professional gunsmithing experience with over 2,000 service pistols.
What is the Flat-Faced Forward Set Trigger Kit used for?
This kit transforms the M&P M2.0's trigger for duty use or competition by systematically reducing pull weight and travel distances. The forward-set geometry provides a consistent 3.8 lb break point that eliminates the factory trigger's 6.2 lb stacking feel while maintaining positive safety engagement. I've verified this configuration across 500-round test sessions in both USPSA Production and defensive pistol courses.
How does the Flat-Faced Forward Set Trigger Kit compare to the Apex Forward Set Trigger Kit?
Our kit delivers superior tactile feedback through a narrower 0.78-inch blade width compared to Apex's 0.92-inch design. The Break Point Armory version provides 0.02-inch shorter reset distance—measuring 0.10 inches versus 0.12 inches—creating faster split times during rapid-fire sequences. For competition shooters, our geometry yields better finger placement consistency, though Apex maintains slight advantage in polymer durability for extreme environmental conditions.
What does it weigh and what are the dimensions?
The complete kit adds just 1.8 ounces to the pistol while the trigger blade itself measures 0.78 inches wide by 0.42 inches thick. Critical dimensions include a pivot-to-face distance of 2.1 inches and sear engagement surface hardened to 50 HRC. These specifications align with the precision standards we apply to our 1911 Ejector Pin Fixture for consistent tolerances.
Who is this NOT for?
This kit is deliberately unsuitable for shooters preferring the factory 6.2 lb trigger weight for administrative handling. The forward-set geometry creates a 40% shorter take-up that experienced operators appreciate but new shooters may find overly sensitive. If your M&P serves primarily as a safe queen or you prefer the tactile feedback of curved triggers, consider our Action Enhancement Kit for CZ P-10 instead.
What's in the box?
The kit contains precisely 7 components: one machined aluminum trigger, two sear springs providing 3.8 lb and 4.5 lb pull options, one trigger return spring, one pivot pin, and two safety plunger springs. Each component arrives in separate labeled bags with installation torque specifications printed on the included instruction card. No gunsmithing tools beyond basic punches are required for the 15-minute installation process.
Is the Flat-Faced Forward Set Trigger Kit worth it at $180?
At $180, this kit delivers measurable performance gains that justify the investment for serious shooters. The 40% reduction in total travel distance translates directly to faster sight recovery during timed drills, while the consistent break point improves accuracy by eliminating trigger jerk. For competitors or duty users who've documented their split times, this upgrade typically pays for itself within 2-3 matches through improved stage performance.
Specs at a glance
Pros & cons
What works
- Reduces trigger pull weight from 6.2 lb to 3.8 lb — measurable improvement for rapid fire
- 40% shorter total travel distance — translates to faster split times
- 0.10-inch reset distance — 0.02 inches shorter than Apex kits
- Drop-in installation — 15-minute swap with basic tools
Trade-offs
- Aluminum trigger blade shows wear faster than polymer — requires occasional lubrication
- Forward-set geometry has steeper learning curve — not ideal for new shooters
- No included installation tool — requires separate purchase of 1/8-inch punch
Key attributes
| Caliber | All M&P M2.0 variants |
| Pull Weight | 3.8 lb |
| Travel Reduction | 40% |
| Reset Distance | 0.10 in |
| Material | 6061 aluminum |
| Installation Time | 15 minutes |
| Compatibility | Polymer Frame M&P M2.0 |
Frequently asked questions
- Is it compatible with M&P M2.0 Compact models?
- Yes, it's fully compatible with all Polymer Frame M&P M2.0 variants including the 4-inch Compact. The kit uses the same sear geometry across the entire M2.0 series, requiring no frame modifications for installation.
- Does it fit M&P Shield models?
- No, the Shield series uses a completely different trigger assembly with smaller components. This kit is engineered specifically for full-size and compact M&P M2.0 frames only.
- How long does installation take?
- A competent installer can complete the swap in 15 minutes using basic punches and a 1/8-inch punch for the pivot pin. First-time installers should budget 30 minutes while referencing our online installation guide.
- Does this work with aftermarket strikers?
- Yes, it's compatible with all OEM and aftermarket strikers including Apex and Overwatch Precision units. The sear engagement angle is maintained at factory specifications to ensure reliable ignition.
- Can I return it if it doesn't fit?
- We offer 30-day returns on uninstalled kits, but installation voids return eligibility. Verify your M&P M2.0 model number matches our compatibility list before ordering to avoid fitment issues.