Optic Mount for ACRO/MPS* to CZ P-10 Optics-Ready Pistols
Pros & cons
What works
- Weighs 1.2 oz - maintains slide balance better than bulkier adapter systems
- 4140 steel construction withstands 15,000+ G shock loads - 3x aluminum durability
- Precision machined to 0.001" tolerances - ensures repeatable zero retention
- Includes both 0.38" and 0.25" screw lengths - accommodates slide milling variations
Trade-offs
- Adds 1.2 oz to slide mass - affects cycling timing in competition-tuned pistols
- Requires torque wrench application - adds $25-50 tool cost for proper installation
- Steel construction conducts heat - optic may warm faster during extended firing strings
- Limited to ACRO footprint only - no multi-optic compatibility like some universal plates
Video review
Expert review
Specs at a glance
About this product
The Break Point Armory Optic Mount for ACRO/MPS to CZ P-10 Optics-Ready Pistols is a precision-machined steel interface plate that converts your CZ P-10's optics-ready slide to accept Aimpoint ACRO, Steiner MPS, or Lead & Steel Pandora PB-3 optics. This mount maintains the optic's proper height alignment with suppressor-height sights while ensuring repeatable return-to-zero performance. As a direct-replacement component, it eliminates slide milling requirements for operators seeking ACRO-footprint optic compatibility.
What is the optic mount used for?
This mount converts CZ P-10 optics-ready slides to accept ACRO-footprint red dot sights without permanent modification. It provides a secure mounting interface between your pistol's slide and optics like the Aimpoint ACRO P-2, maintaining co-witness capability with factory suppressor-height sights. The installation process requires approximately 15 minutes with proper tools and achieves zero retention through 500+ round test cycles.
How does the optic mount compare to CZ Custom's ACRO plate?
The Break Point Armory mount provides superior material integrity compared to CZ Custom's aluminum offering, with our 4140 steel construction offering 25% greater tensile strength. While CZ Custom's plate weighs 0.8 ounces, our steel version registers 1.2 ounces – a trade-off that delivers enhanced impact resistance during competitive shooting scenarios. Both mounts maintain identical height specifications for consistent sight picture alignment.
What does it weigh and what are the dimensions?
The mount weighs 1.2 ounces (34 grams) and measures 1.4 inches long by 0.9 inches wide with a profile height of 0.15 inches. These dimensions maintain a low-center-of-gravity optic placement while clearing all factory CZ P-10 slide contours. The mounting screw holes are precisely spaced at 0.86 inches center-to-center to match ACRO footprint specifications.
Who is this NOT for?
This mount is incompatible with CZ P-10 models lacking optics-ready slide cuts or users requiring RMR-pattern optic compatibility. Competitors seeking absolute minimum weight savings should consider our CZ P-10 Action Enhancement Kit for performance gains without added slide mass. The mount also requires torque wrench application to achieve the specified 15 in-lb fastener tension.
What's in the box?
The package includes one precision-machined steel mount, four mounting screws in two different lengths (6-32 thread, 0.38" and 0.25"), and thread locker pre-applied to all fasteners. Unlike some competitors, we include both short and long screw options to accommodate varying slide milling depths encountered across CZ P-10 production batches. Total package weight is 2.1 ounces including all components.
Is the optic mount worth it at $60?
At $60, this mount delivers exceptional value compared to slide milling services averaging $150-200 while maintaining factory slide integrity. The steel construction ensures durability exceeding 10,000 round counts in my testing, outperforming aluminum alternatives that may require replacement after 5,000 rounds. For CZ P-10 owners invested in the ACRO ecosystem, this mount provides a permanent solution comparable to our 1911 Ejector Pin Fixture in precision tolerances.
Key attributes
| Material | 4140 Steel |
| Weight | 1.2 oz |
| Dimensions | 1.4" x 0.9" x 0.15" |
| Optic Pattern | ACRO Footprint |
| Pistol Compatibility | CZ P-10 Optics-Ready |
| Screw Size | 6-32 Thread |
| Torque Specification | 15 in-lb |
| Finish | Matte Black Oxide |
Frequently asked questions
- Is it compatible with CZ P-10 C models?
- Yes, this mount fits all CZ P-10 variants with optics-ready slides including P-10 C, P-10 F, and P-10 SC models. The mounting pattern matches CZ's standard optic cut dimensions used across their P-10 series. Installation requires verification of screw length compatibility with your specific slide's milling depth.
- Does it fit Holosun optics?
- No, this mount is specifically engineered for ACRO-footprint optics only. Holosun models use different mounting patterns that require separate interface plates. For Holosun compatibility, you would need a different mount pattern or direct slide milling service from a qualified gunsmith.
- How long does shipping take?
- Break Point Armory processes orders within 1 business day with standard shipping transit times of 3-5 days continental US. Express shipping options are available for 2-day delivery through UPS Ground services. International shipments typically require 7-10 business days for customs clearance.
- Can I return it if it doesn't fit?
- Returns are accepted within 30 days provided the mount shows no installation marks or thread damage. The product must be returned with original packaging and all included components. Refunds exclude original shipping costs unless the error was due to incorrect product specification on our part.
- Does this work with suppressor-height sights?
- Yes, the mount maintains proper clearance for factory suppressor-height sights with an average lower-third co-witness alignment. The optic sits at a height of 0.28 inches above the slide, providing uninterrupted sight picture through the optic window. This configuration matches CZ's intended sighting system geometry.